Fast Response 10k Ohm Ntc Power Thermistor For Lamps / Ballasts
Thông tin chi tiết sản phẩm:
Nguồn gốc: | Dongguan,Guangdong,China |
Hàng hiệu: | UCHI |
Chứng nhận: | UL.VDE.SGS. |
Số mô hình: | MF72 |
Thanh toán:
Số lượng đặt hàng tối thiểu: | 1000PCS |
---|---|
Giá bán: | Negotiable |
chi tiết đóng gói: | Bulk/Ammo/Reel |
Thời gian giao hàng: | 3~5 working days |
Điều khoản thanh toán: | T/T,Paypal,Western Union,Money gram |
Khả năng cung cấp: | 8000,000,000PCS Per Month |
Thông tin chi tiết |
|||
Điểm nổi bật: | power ntc thermistor,ntc thermistor assembly |
---|
Mô tả sản phẩm
Fast Response 10k Ohm Ntc Power Thermistor For Lamps / Ballasts
2.5D-20 Ptc 10K Ntc Thermistor Quick Detail:
• Small Size and fast response
• High Power handling capability
• Fast response to surge current
• High material constant (B value)
• Low residual resistance
• Wide operating temperature range -55 to +200C
• R25 allowable tolerance is ±20%
• Long-term Stability and Reliability
2.5D-20 Ptc 10K Ntc Thermistor Description:
The MF72 power NTC thermistor is a kind of semiconductor ceramic element that mostly made from transition metal oxide material, and belongs to negative temperature thermistors. When you tune on an electrical equipment ,the surge current can be restrained by a power NTC thermistor connected in series with the power circuit .Because of the continuing action of current, temperature of power NTC thermistor raising, the resistance will rapidly drop to a small value, the consumed power can be ignored. So it can not affect normal operating current. Therefore, using power NTC thermistor is a most effectively amd most brief measure to restrain surge current, protecting electrical equipment from destruction.
2.5D-20 Ptc 10K Ntc Thermistor Applications:
Can be installed into the power circuits of:
• Power supplies and inverters
• Uninterruptible Power Supplies
• Energy saving lamps
• Electronic Ballasts
• Filament Protection of various types of lamps
• Some types of heaters
• For higher power circuits ask about the MF73
and MF74 series surge suppressors.
2.5D-20 Ptc 10K Ntc ThermistorSpecifications:
Production Sign Explain
2.5D-20 Ptc 10K Ntc ThermistorRemark:
1. The Max. Steady State Current meets when the decimal expressed with three figures.
Other expressed with the actual value.
2.The Rated Zero-power Resistance meets the decimal or is bigger than is 100Ω when with three expressions, other expressed with two.
2.5D-20 Ptc 10K Ntc ThermistorShapec Structure Picture
2.5D-20 Ptc 10K Ntc Thermistor Specification
Part No.:MF21-2.5-D20MSSB |
NTC THERMISTOR2.5W |
Rev.: 1/A (2012.05.30) | |||||||
1. APPEARANCE | |||||||||
1-1. Dimensions (mm)
|
1-2. Marking NTC 2.5D-15
|
||||||||
1-3.Coating
Coating
|
|||||||||
Material PF resin
|
Color
Black
|
||||||||
1-4. Leads Tin – plated copper wire
Straight
|
|||||||||
DMax: 22.5 | TMax: 7.0 | F: 10±1.0 | |||||||
d: 1.0±0.05 | LMin: 25 | ||||||||
2. MECHANICAL CHARACTERISTICS | |||||||||
Item | Specification | Test Conditions & Methods | |||||||
2-1. Solder-ability | The terminals shall be uniformly tinned, and its area≥95% | Dipping theNTC terminals to a depth of 15mm in a soldering bath of245±5℃ and to the place of 6mm far from NTC body for 3±0.5s (See IEC68-2-20 /GB2423.28 Ta ) | |||||||
2-2. Resistance To Soldering Heat
|
No visible mechanical damage. ΔR/RN ≤20% (ΔR =RN-RN')
|
Dipping the NTC terminals to a depth of 15mm in a soldering bath of 260±5℃ and to the place for 6mm below from NTC body for 3±0.5s.After recovering4-5h under 25±2℃. The rated zero power resistance value RN' shall be measured. (See IEC68-2-20 /GB2423.28 Tb)
|
Part No.:MF21-2.5-D20MSSB |
NTC THERMISTOR2.5W |
Rev.: 1/A (2012.05.30) | |||
2-3. Strength of lead terminal
|
No break out ΔR/RN ≤20% (ΔR =RN-RN') |
Fasten the body and apply a force gradually to each lead until 10N and then keep for 10sec, Hold body and apply a force to each lead until 90°slowly at 5N in the direction of lead axis and then keep for 10sec, and do this in the opposite direction repeat for other terminal. After recovering 4~5h under 25±2℃, the rated zero power resistance value RN' shall be measured. (See IEC68-2-21/GB2423.29 Ua / Ub) |
|||
3.ELECTRICAL CHARACTERISTICS | |||||
3-1.Test Conditions & Method | |||||
Items | Spec. | Test Conditions & Methods | |||
3-1-1.Rated Zero-Power Resistance RN (W) |
2.5±20% |
Ambient temp. Range:25℃±2℃(TA). Testing voltage: 1.5VDC After placing for 1~2 hours under TA, the resistance value shall be measured.
|
|||
3-1-2.Thermal Dissipation Constant (mW/°C) |
≥24 |
The thermal dissipation constant(d) could be calculated by the ratio of a change in power dissipation(DP) of the thermistor to a change in temperature(DT) of the thermistor at a specified ambient temperature
|
|||
3-1-3.Thermal Time Constant t (s) |
≤88 |
The time(t) shall be measured within which the temperature change of NTC thermistor is reached at 63.2% of the ambient temperature change under zero power condition
|
|||
3-1-4.Material Constant B (°K) |
2800±10% B=T1T2/( T2- T1) ×Ln (R1/R2) |
R1 , R2 is zero-power resistance at T1 , T2 T1 = 298.15°K(25°C) T2 = 323.15°K(50°C)
|
3-1-4.Material Constant B (°K) |
2800±10% B=T1T2/( T2- T1) ×Ln(R1/R2) |
R1 , R2 is zero-power resistance at T1 , T2 T1 = 298.15°K(25°C) T2 = 323.15°K(50°C)
|
Part No.:MF21-2.5-D20MSSB |
NTC THERMISTOR2.5W |
Rev.: 1/A (2012.05.30) | |
3-1-5.Max.Steady State Current (A) |
8 No visible mechanical damage. ΔRN / RN ≤20% (ΔR =RN-RN') |
Ambient temp. Range:25℃±2℃. Testing Current :7A
|
|
4. Reliability Test | |||
Items | Spec. | Test Conditions & Methods | |
*4-1. Temp. Cycling Testing
|
No visible mechanical damage. ΔRN / RN ≤20% (ΔR =RN-RN')
|
Ta:-40±3℃/ 30min→25±2℃/ 5min→ Tb:160±3℃/ 30min→25±2℃/ 5min Cycles: 5times After recovering 4~5 h under 25±2℃, the rated zero power resistance value RN' shall be measured. |
|
*4-2. Electrical Cycling Testing
|
Ambient temp. Range:25℃±2℃. Cycles: 2,000times On / Off: 5 s / 55 s Test Current: 7A After recovering 4~5h under 25±2℃, the rated zero power resistance value RN' shall be measured.
|
||
*4-3.LoadLife ( Endurance ) Testing
|
Ambient temp. Range:25℃±2℃; 7A/ 1,000±24h After recovering 4~5 h under 25±2℃, the rated zero power resistance value RN' shall be measured. |
||
*4-3. Humidity Testing
|
No visible mechanical damage. ΔRN / RN ≤20% (ΔR =RN-RN') |
Ambient temp. range : 40℃±2℃ R.H.:93±3% , Energized time:1000±24 h After recovering 4~5 h under 25±2℃, the rated zero power resistance value RN' shall be measured.
|
Part No.:MF21-2.5-D20MSSB |
NTC THERMISTOR2.5W |
Rev.: 1/A (2012.05.30) | |||||||||||||||||||||
5. INSPECTION 5-1. Lot Inspection Sampling with IEC410 / DIN ISO 2859-1 (GB/T2828.1-2003) ; Testing with SPEC.NO.: WWSMF21-15-18.
|
|||||||||||||||||||||||
Item | IL | AQL | Item | IL | AQL | ||||||||||||||||||
Appearance | Ⅱ | 0.65 |
Rated Zero-Power Resistance RN |
Ⅱ | 0.65 | ||||||||||||||||||
Soldering-ability |
S-2 | 2.5 |
Max.Steady State Current (A) |
S-2 | 8 | ||||||||||||||||||
5-2. Periodic Inspection See the items with |
|||||||||||||||||||||||
6. NUMBERING SYSTEM AND PACKING 6-1. PART NUMBERING
1 2 3 4 5 6 7
1 Series: MF21 - For limiting of inrush current
2 Rated Zero Power Resistance: 3 - 3Ω 5 - 5Ω 3 Disc. Diameter: D15 - 15mm D11 - 11mm 4 Tolerance of Resistance: M - ±20% K - ±10% 5 Shape of Leads: U - In-formed S - Straight A - Axis Formed N - No Leads 6 Coating Material : S - Silicone N - No Coating P - PF Resin E - Epoxy 7 Packing Type :B - Bulk A - Ammo R - Reel
|
Part No.:MF21-2.5-D20MSSB |
NTC THERMISTOR2.5W |
Rev.: 1/A (2012.05.30) |
6-3. Packing Type Bulk
|
||
7. Operating Temperature Range: -55 ~ + 200℃ |
||
8. STORAGE CONDITIONS: 8-1.Temperature: -10℃~+40℃ 8-2. Humidity: ≤70%RH 8-3. Term: ≤6 months (First-in/ First-out) 8-4. Place: Do not exposing the components to the following conditions, otherwise, it may result in deterioration of characteristics. : 1) Corrosive gas or deoxidizing gas. 2) Flammable and explosive gases. 3) Oil, water and chemical liquid. 4) Under the sunlight. 8-5. Handling after seal open: After unpacking of the minimum package, reseal it promptly or store it inside a sealed container with a drying agent. |
||
9. WARNING ! Do not apply the components under the following conditions, otherwise, it may result in deterioration of characteristics, destruction of components or in the worst case, to catching fire.
1) Exceeding Imax. 2) Exceeding rated temperature range. 3) Inferior thermal dissipation (Due to badly inferior thermal dissipation, some part of the components body will become overheated and then be damaged.)
|
2.5D-20 NTC Thermistor Image